Voltage transformer cubicle phase ground

It is used to measure the voltage on the line through voltage transformers.

Content

Busbar: copper units that connect the equipment to each other.

Load Break Switch(switch disconnector); Medium-voltage switchgear devices that are capable of opening and closing under load . Active parts of them has been made from epoxy resin and MV switchgear devices  located into the hopper within the SF6 gas filled with a sealed pressure system.   There are 3 position; open, close and earthing. Earthing switch in the SF6 gas has the ability of closing on by-pass.

Earthing switch: Provides connection between electrical circuits that are not under tension and earth. It is air-insulated.

Voltage transformer: It reduces to the desired value for the purpose of protection or measuring the voltage of the busbar. It is epoxy resinous.

Heater : It prevents to occur moisture drying the air.

Fuse: It is used for purpose of protection.

Sizes